How To Remove And Replace The Tuttnauer Door Bellows









The Tuttnauer Door Bellows
Removal & Installation Guide

There are two method of removing the Door Bellows

Method 1 – Compressed air

Tuttnauer Door Bellows Removal
  1. Remove the Brass Housing Bolt from the Door
  2. Locate the hole on the face of the Door that leads to the bellows cavity
  3. Block the opening in the side of the Door where the Housing Bolt was removed with a thick book or block of wood. Care should be taken because the Bellows Assembly will be projected with a great deal of force when using compressed air
  4. Apply air pressure to the hole on the face of the Door The air pressure will blow the Bellows Assembly out of the cavity
  5. Check that the bellows gasket has been removed from the bellows cavity, if not reach into the door with a long thin screwdriver and remove the gasket.
  6. Remove the old bellows from the brass housing

Method 2 - Extraction

Tuttnauer Door Bellows Removal
  1. Remove the Brass Housing Bolt from the Door
  2. Remove the steel locking pin
  3. Using the Bellows Extraction Tool or any 4 inch long drywall screw insert the tool or screw into the bellows assembly until the brass bushing is reached.
  4. Thread the tool or screw into the center hole of the brass bushing one or two turns or until the threads have locked on to the bushing.
  5. Using the tool or screw remove the Bellows Assembly from the Door
  6. Check that the bellows gasket has been removed from the Door, if not reach into the door with the tool or screw and remove the gasket.
  7. Remove the old bellows from the Brass Housing

Tuttnauer Door Bellows Installation

  1. Insert the new Bellows Kit into the Brass Housing
  2. Install the Brass Housing Bolt on to the front of the Housing
  3. Insert the assembly into the Door
  4. Tighten down the Housing Bolt, it needs only to be snug.




This product was added to our catalog on Friday 16 April, 2010.



Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
636-390-2792
Mon thru Fri 8:00am To 4:30 pm Central Time

Testimonials

Don't Take Our Word For It.....




AllClaveParts.com - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.
Clearview Medical.com

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI


Dr Whitehouse Loves AllClaveParts.com
" It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile


Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to allclaveparts.com.

Steve Douglas, DDS
Indianapolis, IN
stevedouglasddspc.com


Testimonials

It was a pleasure working with Wally

It was a pleasure working with Wally

It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech did not know I could find a...
Read More ->


It worked perfectly, just like it did in the past

Thanks Wally..... Here is a copy of the letter I am sending to Henry Schein Pro Repair. Use it any way you see fit. The machine works just fine as...
Read More ->


Wally and supporting staff

Anytime I am repairing one of the autoclaves I know Wally is just a phone call away. He has done an outstanding job helping me over the years. I also...
Read More ->


Thank you sir for your patience and expertise

Thank you sir for your patience and expertise

Wally,my name is Daniel O'Hare,my wife's name is Lorraine and she owns a dental practice in San Francisco, where she works as the only provider, even...
Read More ->


I will recommend your site to all my dental friends

I will recommend your site to all my dental friends

My Statim 2000 stopped working. Benco dental came down and said the thermal fuse and computer board was bad. Cost $2600 to repair with 90 day...
Read More ->


Parse Time: 0.519 - Number of Queries: 146 - Query Time: 0.259657128448
Content

Check Out Our Specials


A Best Seller
Click Here To Check Out Everything On Sale