How To Repair Your Autoclave PC Control Board

Why Spend Hundreds…Even Thousands…of Dollars Replacing Your Autoclave Control Board When We Can Show You How to Repair It for Only $37?

Have you been told that your autoclave control board or power supply board can't be repaired and must be replaced? Have the high prices of getting a new autoclave control board left you in a state of disbelief? Or have you found that a replacement control board is no longer even available for your unit?

If you answered yes to any of these questions, you're in luck. We're going to show you how to repair your autoclave control board, so you don't have to spend hundreds of dollars on a replacement board or even thousands on a brand new unit.

It doesn't matter how mechanically helpless you might be, the power-packed program from electronics instructor Jestin Yong will walk you through your autoclave board repair. Following Jestin's guidance, countless people just like you have successfully repaired their control boards and saved hundreds of dollars in the process.

We're so confident that you can learn how to repair your autoclave control board, we've backed this program with a 100% money-back guarantee. If you're not fully satisfied with the results you achieve through this program, you can get your money back-no questions asked.

With this one-of-a-kind program, you'll:

  • Discover how to test the components on your autoclave control board
  • Get step-by-step guidance for repairing damaged components
  • Learn not just how…but why your autoclave control board isn't functional

Ready to learn how to fix your autoclave control board for just $37? Click here to place your order today!

But Wait…There's More!

This program goes far above and beyond just teaching you how to repair your control board. You'll get the information you need to troubleshoot and repair almost any piece of electronics equipment you can think of, including:

  • Power Supply Boards
  • Lab Equipment Circuitry
  • Dental Chair Circuitry
  • Computers
  • Monitors
  • LCD Monitors & Screens
  • Printers
  • Televisions
  • Radios

What's Included in This Program?

For just $37 (that's hundreds less than it costs to replace your control board!), you'll get:

  • The Electronics Testing Guide
  • 6 Bonus Electronic Troubleshooting Guides
  • Free Email Questions & Answers with Jestin Yong For the next 3 Months
  • No Questions Asked Money-Back Guarantee

Don't spend hundreds of dollars replacing your autoclave control board. We can teach you how to fix it for just $37. Click here to place your order today!

Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
Mon thru Fri 8:00am To 4:30 pm Central Time


Don't Take Our Word For It..... - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI

Dr Whitehouse Loves
" It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile

Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to

Steve Douglas, DDS
Indianapolis, IN


Thank You Wally

Thank You Wally

I want to thank you Wally for talking me through my autoclave repair. Our estimate was $600 minimum with the machine taken away for service Your...

Thanks again Wally!

Thanks again Wally!

"My Ritter Autoclave started to act up on me on a Monday morning. It was giving me 3 different Error Messages and would not complete a cycle." "What...

I will recommend your site to all my dental friends

I will recommend your site to all my dental friends

My Statim 2000 stopped working. Benco dental came down and said the thermal fuse and computer board was bad. Cost $2600 to repair with 90 day...

Great service from the AllClaveParts company

Great service from the AllClaveParts company

Great service from the AllClaveParts company. I have saved over a thousand dollars repairing my own Statim unit with their guidance. I strongly...

Wally and supporting staff

Anytime I am repairing one of the autoclaves I know Wally is just a phone call away. He has done an outstanding job helping me over the years. I also...

Specials  [more]

$429.97  $399.97
Save: $30.00 off
Parse Time: 0.339 - Number of Queries: 115 - Query Time: 0.127117163208

Check Out Our Specials

A Best Seller
Click Here To Check Out Everything On Sale