E008 - Door Opens At End Of Cycle

This Troubleshooting Guide is applicable for the following Midmark Autoclave Model Numbers: M9-001 thru -019, M9D-001 thru -019, M11-001 thru -019, M11D-001 thru -019

Notice Red Led Display


If Your Midmark has a Red LED Display as shown above, then this is the right guide for you

Midmark M9 & M11 Error Code E008
Door Opens At End Of Cycle


Display/Symptom Cause What to Check Solution
Error code 8
[Door Switch did not change status after Door Solenoid was activated.
  1. Door Switch Malfunctioning
  1. Perform continuity check on door switch. Check for loose connections
  1. Replace Door Switch

Parts List


allclaveparts.com widget logo