Testing The NAPCO 704-9000D Timer

The Following Procedures Are For The NAPCO 9000D Autoclave Only

How To Test The NAPCO 9000D Autoclave Timer

  1. Turn Power Switch To "ON" Position. Set Timer For 20 Minutes & Observe The Timer In Operation
  2. If The Rotation Speed Of The Timer Is Not Accurate, It Is Defective & Should Be Replaced
  3. If The Time Light Is "ON" But The Timer Does Not Operate, Test With Voltmeter Across Terminals R-1 & L-3 (See Wiring Diagram)
    If No Voltage Here, Make Sure All The Connections Are Tight And There Is Power To The Timer
    Retest & If Still Defective, Replace Timer

allclaveparts.com widget logo