Statim Part #01-100571s
CASSETTE MICRO SWITCH KIT
- Micro Switch with 26" wire
- 12" clear PVC tubing
- (2) Split Lock Washer Part #RPH253
- (2) Socket Head Cap Screw Part #ADS120
- (6) Cable Tie Part #RPT083)
Recommended Tool: The Cassette Microswitch Tool Hex Ball Driver
Fits: Probe Bracket
Model This Part Fits: Statim 5000 Autoclaves
When your Statim 5000 tells you to Insert the Cassette, and the Cassette Is Already In Place, Then this is the Part You Need To Fix It!
TIP: The Original Statim Cassette Microswitch is held in place with two small Pan Head screws which are difficult to remove.
In addition, the compressor must be removed in order to access these screws.
However, the AllClaveParts Cassette Micro Switch comes with two Socket Head Cap screws which are easy to install or remove when using the Cassette Microswitch Hex Ball Driver.
The Hex Ball Driver is designed to reach way back into the machine to easily remove the screws, even at an angle, and without having to remove the compressor (see drawing below). (Caution: Disconnect the power to the machine before servicing)