How To Test The Tuttnauer Power Switch

Easy To Follow Step-By-Step Intructions


Tools Needed:
  • A Continuity Tester or OHM Meter for This Test
  • A Screwdriver to Remove the Cabinet
Warning Make sure the autoclave is unplugged from the wall outlet during this entire procedure

What The Power Switch Does


Like any other switch, the switch when turned on makes an electrical connection and allows power to flow through onto the next components in line. When it is turned off, it simply breaks the connection.

Testing the Power Switch on Tuttnauer Autoclaves is easy. You will have to remove the cabinet to get to the back side of the switch

The Power Switch has 4 Terminals on the back side. They are separated into pairs by a plastic wall. Each side has a brass colored terminal and a silver colored terminal. One side is for the Power to come in, and the other side is for the power to go out.

Back Side of Tttnauer Power Switch

Test Procedure


Lets get started:
  1. Set your Ohm Meter to the Continuity Setting
  2. Test each pair of terminals with the switch turned off, by placing one probe from your meter to one terminal (Brass Colored), and the other probe to the other terminal (Silver Colored) (It does not matter which colored probe goes where)
The Switch should not be continous (the display read out will be the Number "1" (one) on a digital meter)...meaning there is no eletrical connection and the power will not flow through it

Now turn the switch to the ON position and repeat the test above. This time, the switch should be continuous (the display read out will be a "0" (zero) on a digital meter, meaning the electrical connection is completed and power would be allowed to flow through it

If your Power Switch fails the test above, then it is defective, and will need to be replaced. Click Here and find and order the Power Switch For Your Tuttnauer Autoclave.

Replacing it is easy. And if you run into a problem, simply contact us and we will be happy to walk you through it


This product was added to our catalog on Saturday 23 January, 2016.



Customer Reviews
Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
636-390-2792
Mon thru Fri 8:00am To 4:30 pm Central Time

Testimonials

Don't Take Our Word For It.....


Customer Reviews


AllClaveParts.com - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.
Clearview Medical.com

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI


Dr Whitehouse Loves AllClaveParts.com
"It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile


Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to allclaveparts.com.

Steve Douglas, DDS
Indianapolis, IN
stevedouglasddspc.com


Parse Time: 0.357 - Number of Queries: 168 - Query Time: 0.137805050873
Content

Check Out Our Specials


A Best Seller
Click Here To Check Out Everything On Sale