Setting the Date & Time on Statim Autoclaves

How To Set the Time and Date on Statim Autoclaves with Printer


The time and date feature is available with the optional printer only. To set the time and date follow these steps while watching the blinking cursor on the LCD.

  1. Turn the main power switch off
  2. Press and hold the UNWRAPPED button on the front of the Statim. At the same time, turn on the main power switch at the back of the Statim. The display should appear similar to the following example
  3. 18:30 01/01/2015
    hh:mm dd/mm/yy

    NOTE: The date reads day, month and year.

    Date & Time on the Statim 5000 Autoclave

  4. There are five fields on the display showing the hours (24 hour clock), minutes, day, month and year. The cycle buttons of the keypad are used to select a field for setting and changing that field’s value. The blinking cursor highlights the field currently selected
  5. To increase the value of the selected field, press the UNWRAPPED cycle button. Hold the button down to continuously increase the value
  6. To decrease the value of the selected field, press the WRAPPED cycle button. Hold the button down to continuously decrease the value
  7. To select the next field for setting, press the RUBBER AND PLASTICS cycle button. Press the button repeatedly to select subsequent fields
  8. To save changes and return to regular operating mode, press the STOP button


This product was added to our catalog on Friday 27 February, 2015.



Customer Reviews
Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
636-390-2792
Mon thru Fri 8:00am To 4:30 pm Central Time

Testimonials

Don't Take Our Word For It.....


Customer Reviews


AllClaveParts.com - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.
Clearview Medical.com

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI


Dr Whitehouse Loves AllClaveParts.com
"It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile


Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to allclaveparts.com.

Steve Douglas, DDS
Indianapolis, IN
stevedouglasddspc.com


Parse Time: 0.172 - Number of Queries: 172 - Query Time: 0.0736621578827
Content

Check Out Our Specials


A Best Seller
Click Here To Check Out Everything On Sale