Testing the Door Motor

How To Test The Midmark Autoclave Door Motor System


Testing the Door Motor Assembly on the Midmark Autoclaves is simple, once you know how. Simply Follow These Step-By-Step Directions

Before Starting, you will need to remove the right hand side panel (as you are facing the autoclave) by removing the two screws on top and then lifting out the panel

Procedure Preview
Step 1: Remove the Two Wires From The Motor Locate the 2 wires to be removed
Door Motor With Wires Removed Pull the wires off the terminals
Step 2: Set meter to 20K ohms Ω Move the dial on your meter to 20K Ohms Ω
Step 3: Place Meter Probes On Terminals Place a Probe On Each Terminal - Color of Probe does not matter
Step 4: Look At Readings on Your Meter
The Acceptable Range for 120V Autoclaves is 6620 Plus or minus 20%
The Acceptable Range for 230V Autoclaves is 12,200 Plus or minus 20%
The reading you are looking for
If reading is out of acceptable range...Replace door motor. But, If reading is within acceptable range... Perform PC Board Relay Test Click Here For The M9 Door Motor Assembly
Click Here for the M11 Door Motor Assembly


This product was added to our catalog on Wednesday 31 August, 2016.



Customer Reviews
Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
636-390-2792
Mon thru Fri 8:00am To 4:30 pm Central Time

Testimonials

Don't Take Our Word For It.....


Customer Reviews


AllClaveParts.com - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.
Clearview Medical.com

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI


Dr Whitehouse Loves AllClaveParts.com
"It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile


Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to allclaveparts.com.

Steve Douglas, DDS
Indianapolis, IN
stevedouglasddspc.com


Parse Time: 0.191 - Number of Queries: 182 - Query Time: 0.071758103241
Content

Check Out Our Specials


A Best Seller
Click Here To Check Out Everything On Sale