The Tuttnauer Door Bellows









Everything You Ever Wanted To Know About The Tuttnauer Door Bellows (And Then Some)

The function of the Tuttnauer Door Bellows Assembly is to insure that the Door remains closed while there is pressure inside the Chamber.

How The Tuttnauer Door Bellows Works

The Door Bellows Assembly is located in a cavity of the Door, in the area which is engaged by the Closing Device.

There is an access hole, to this cavity, in the face of the Door. As steam pressure builds, the pressure is allowed into the bellows cavity and expands the flexible Silicone Bellows.

This pushes the metal Locking Pin out through a hole in the Housing Bolt and into one of the notches on the Closing Device. This locks the Closing Device and prevents the Door from being opened while pressure remains in the Chamber.

When the pressure in the Chamber is released, the spring like action of the Silicone Bellows pulls the Locking Pin back releasing the Closing Device.

How Do You Know If Your Tuttnauer Door Bellows Is Bad?

Indications of a faulty Door Bellows include (While Running A Cycle):
  • Leakage is noted around the center of the door or around the latch
  • Puddling of water on the counter below the Closing Device
  • A Whistling Noise
Also, a "LOW WATER" Warning Appearing On The Display can be caused by the Door Bellows allowing water or steam to escape at a higher than normal rate

How Often Should The Tuttnauer Door Bellows Be Replaced?


There is no set recommendation for replacing the Tuttnauer Door Bellows.

We like to replace them once a year during normal preventative maintenance.

We highly recommend you keep a spare replacement on hand. So when the Tuttnauer Door Bellows starts leaking, you will be able to get back up and running within minutes, without having to call a repair company!


This product was added to our catalog on Friday 16 April, 2010.



Customer Reviews
Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
636-390-2792
Mon thru Fri 8:00am To 4:30 pm Central Time

Testimonials

Don't Take Our Word For It.....


Customer Reviews


AllClaveParts.com - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.
Clearview Medical.com

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI


Dr Whitehouse Loves AllClaveParts.com
"It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile


Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to allclaveparts.com.

Steve Douglas, DDS
Indianapolis, IN
stevedouglasddspc.com


Parse Time: 0.164 - Number of Queries: 174 - Query Time: 0.0662960202942
Content

Check Out Our Specials


A Best Seller
Click Here To Check Out Everything On Sale