Midmark M11 DOOR GASKET (Door Seal)

• 12.875
• Red Silicone
• Included In The Midmark M11 Autoclave Sterilizer PM Kit (Part #MIK080-808)

So, where's the wire?

The original Midmark Door Gaskets require a wire to hold them in place - ours do not....Because they are not needed with our New & Improved Midmark M11 Door Gaskets!

When you order one of ours, you can throw the wire away (using the wire on one of our door gaskets will cause a leak). All you need is our Door Gasket

1. Remove the old door gasket
2. Clean the gasket groove in the door, and chamber face
3. For easy installation of the new gasket, use the “South-East-West-North” method (i.e. begin installing the gasket at the bottom of the door, then install the left and right sides and finishing at the top by squeezing in any of the excess making sure that the gasket fits flush)

"Midmark M11 Autoclave Repair Made Simple™"