FOOT UP and FOOT DOWN Functions do not work

Midmark Ritter 119 Exam Table Troubleshooting

 

Problem Sympton Probable Cause Check Solution
FOOT UP and FOOT DOWN functions do not work. All other functions work Motor pump runs when FOOT UP or FOOT DOWN foot pedal is depressed, but foot section does not move. Foot cylinder solenoid valve is malfunctioning Check to see if foot cylinder solenoid valve energizes (audible click) when foot pedal is depressed Replace foot cylinder Part #MIC065-6318
    Red/black wire running from terminal 3 of foot switch to terminal block is broken or disconnected Check continuity of wire and connections Clean any dirty connections. Tighten any loose connections. Replace any damaged connections
    Wires running from terminal block to pan safety limit switch and foot cylinder solenoid valve are broken or disconnected Check continuity of wire and connections Clean any dirty connections. Tighten any loose connections. Replace any damaged connections
    Treatment pan assembly is not pushed in all the way. Check that the treatment pan assembly is pushed in all the way Push treatment pan assembly in all the way

 


allclaveparts.com widget logo