Shopper Award
AllClaveParts

TILT UP and TILT DOWN Functions Do Not Work

Categories

TILT UP and TILT DOWN Functions Do Not Work

Midmark Ritter 119 Exam Table Troubleshooting


Problem Sympton Probable Cause Check Solution
TILT UP and TILT DOWN functions do not work. All other functions work Motor pump runs when TILT UP or TILT DOWN foot pedal is depressed, but table does not move Tilt cylinder solenoid valve is malfunctioning Check to see if Tilt Cylinder solenoid valve energizes (audible click) when foot pedal is depressed Replace Tilt Cylinder Part #MIC064-6315
Orange wire running from terminal 3 of foot switch to terminal block is broken or disconnected Check continuity of wire and connections Clean any dirty connections. Tighten any loose connections. Replace any damaged connections
Wire running from terminal block to tilt cylinder solenoid valve is broken or disconnected Check continuity of wire and connections Clean any dirty connections. Tighten any loose connections. Replace any damaged connections