
Part #NAG002-3352
NAPCO Part #34002877
Old NAPCO Part #94292
DOOR GASKET (DOOR SEAL) (QUAD RING)
- 6.500" OD x .187" sq. C/S
Fits: Door
Model(s) This Part Fits: NAPCO Early Model 704-8000 Autoclaves
NOTE: Please measure the size of your old gasket.
NAPCO Changed door styles during production of the NAPCO 704-8000. At one point, they used the doors off the 704-7000 (NAG002) (which used the 6.5 inch gasket).
And then at another point, switched to the larger chambers and doors of the 704-9000 (NAG001) (10 inch diameter)
NAPCO 704-7000 & Early Model 704-8000 Door Gasket Installation Procedure
Remove the old door gasket. Clean the gasket groove and chamber face ring surface.
For easy install of the new gasket, use the "star" or "North-South-East-West" method (ie. begin installing the gasket at the top of the door, then the bottom, then the left side, then the right side, and then everything in between making sure that the gasket fits flush without bumps or gaps).
