704-9000 HEATING ELEMENT (UPPER - DRYER)


$134.97

 Sold Out 

  • Description
  • Info & Guide
  • Specs
Part #NAH003-2463
OEM Part #51245045
Old OEM Part #10-2204-001-05

HEATING ELEMENT

This Part Is No Longer Available

  • 1250W, 120VAC, ~11.5ohms
  • Includes: See Notes
  • Mounts in water pan

Model(s) This Part Fits: All NAPCO 704-9000 Autoclaves

Notes: Includes:

  • (2) .062 Fiber Washer
  • (2) .125 Fiber Washer
  • (2) 1/2-20 Mounting Nut
  • (2) 1/2" Lock Washer
  • (2) No. 8 Flat Washer
  • (2) # 8 Internal Tooth Star Washer and
  • (4) 8-32 Terminal Nut

Tech Tip:  Be sure your original NAPCO 704-9000 Heating Element is defective before replacing it, by performing the following test

Testing The NAPCO 704-9000 Heating Element

This test consists of measuring the amount of resistance in the element. To do this, first, turn the autoclave off and unplug it from the wall

WARNING: CURRENT MUST NOT BE PRESENT WHEN MEASURING RESISTANCE.

Set your volt/ohm meter on 200 ohms (200 NOT 200k). The ohms range is located within the Omega (Ω )(look for this symbol) section of your meter. It is also the area with "k" ranges (ie: 2000k,. 200k, 20K and then 2000, 200).

Place a probe from the volt/ohm meter on each wire where it connects to the element (it really doesn't matter which color probe goes where). 

Note:  There were 2 different heating elements used in the NAPCO 704-9000.  Identify Yours And Then Check Your Ranges In The Table Below
                                 
NAH004-2464 -1400 Watts                      NAH003-2463 - 1250 Watts

For the heating element to be good, it must fall within the resistance range in this table.    If your reading is outside of this range, then it is defective and needs to be replaced.
Model Part # Volts Watts Amps Resistance Resistance Range
NAPCO 704-9000 NAH004-2464 120v 1400 Watts 11.667 amps ~10.0 Ohms 9.26 11.30 ohms
NAPCO 704-9000 NAH003-2463 120v 1250Watts 10.4167amps ~11.5Ohms 10.37 12.67 ohms



Customer Reviews
Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
636-390-2792
Mon thru Fri 8:00am To 4:30 pm Central Time

Testimonials

Don't Take Our Word For It.....


Customer Reviews


AllClaveParts.com - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.
Clearview Medical.com

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI


Dr Whitehouse Loves AllClaveParts.com
"It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile


Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to allclaveparts.com.

Steve Douglas, DDS
Indianapolis, IN
stevedouglasddspc.com


Parse Time: 0.331 - Number of Queries: 206 - Query Time: 0.141581621445
Content

Check Out Our Specials


A Best Seller
Click Here To Check Out Everything On Sale