MAGNACLAVE FUNCTION SWITCH (3 LEAD)


$12.97

Add to Cart:


  • Description
  • Info & Guide
  • Specs
Guaranteed Quality Pelton Crane Magnaclave Autoclave Parts

Part #PCS043-295
OEM Part #004079

FUNCTION SWITCH (3 LEAD) Magnaclave Function Switch
  • 20A @ 125-250VAC, 50/60HZ, 1HP @ 125VAC; 2HP @ 250VAC
  • Mounts to bracket in main valve assembly
Model This Part Fits: Pelton Crane Magnaclave Autoclave

NOTE: The Magnaclave Function Switch was originally manufactured with the opening of the arm on the switch facing the end with the 2 terminals as shown in the drawing to the right.

The manufacturer now only makes the switches with the opening facing the single terminal end and the original is no longer available. Install the new switch with the arm in it's original end and simply move the wires to their appropriate connections



How To Test The Pelton Crane Magnaclave Function Switch

The function switch is connected to the "Power On" Light, The "Heat On" Light and the Over Temperature Switch (which in turn leads to the Main Heating Element (Bottom Heating Element).

The Pelton Crane Function Switch responds to the turning of the Control Knob (the knob on the bottom marked: Fill/Sterilize/Vent/Off) When one of the positions are selected with the control knob, the switch is turned either Off or On (like a light switch).

The Function Switch is located behind the bottom knob on the sterilizer. To Get to it for testing, you will have to remove the cabinet. Once the cabinet is removed you will notice three brown (or black) switches seemingly connected together. The switch closest to the rear of the sterilizer is the Function Switch (it has 2 spaded terminals on the bottom and one on top).

Indications of a faulty function switch would be problems with the temperature, and/or the "Power" Light, and/or the "Heat On" light

To test the Function Switch, you will need a volt/ohm meter and a standard screwdriver (to remove the cabinet)

WARNING: Before Proceeding, Turn The Unit Off & Unplug It From The Wall. Current Must Not Be Present When Performing This Test

PCS043loc (4K)

Set Your Volt/Ohm Meter to 20k Ohms. This setting is in the range with the Omega Symbol

In this test, it doesn't matter which color lead from your ohm meter you use to touch the terminals. If readings are any other than described below, the switch is faulty & needs to be replaced.

Control Knob Positiion Function Switch Setting Valve Activated Probe Placement Reading
Off Off None Terminals 1 & 3 Digital Meter: 1 (Infinity)
Analog Meter: Infinity (Needle Stays To Left)
Off Off None Terminals 1 & 2 Digital Meter: 0
Analog Meter: 0 (Needle Goes All The Way To The Right)
Fill On Fill Terminals 1 & 3 Digital Meter: 0
Analog Meter: 0 (Needle Goes All The Way To The Right)
Fill On Fill Terminals 1 & 2 Digital Meter: 1
Analog Meter: Infinity (Needle Stays To Left)
Sterilize On None Terminals 1 & 3 Diigital Meter: 0
Analog Meter: 0 (Needle Goes All The Way To The Right)
Sterilize On None Terminals 1 & 2 Digital Meter: 1
Analog Meter: Infinity (Needle Stays To Left)
Vent On Vent Terminals 1 & 3 Diigital Meter: 0
Analog Meter: (Needle Goes All The Way To The Right)
Vent On Vent Terminals 1 & 2 Digital Meter: 1
Analog Meter: Infinity (Needle Stays To Left)

How The Pelton Crane Magnaclave Function Switch Works

The control knob opens and closes the fill and vent valves, in response to the operation selected and in turn, affects the state of the Function Switch.

Notice the long bar on the chamber side of the function switch and the button underneath it. The button is a push button. When the control knob is turned, the bar either depresses the button (turning it on) or releases it (turning it off)



Pelton Crane Magnaclave Autoclave Repair Made Simple ™



Customer Reviews
Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
636-390-2792
Mon thru Fri 8:00am To 4:30 pm Central Time

Testimonials

Don't Take Our Word For It.....


Customer Reviews


AllClaveParts.com - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.
Clearview Medical.com

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI


Dr Whitehouse Loves AllClaveParts.com
"It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile


Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to allclaveparts.com.

Steve Douglas, DDS
Indianapolis, IN
stevedouglasddspc.com


Parse Time: 0.327 - Number of Queries: 262 - Query Time: 0.126280029999
Content

Check Out Our Specials


A Best Seller
Click Here To Check Out Everything On Sale