Add to Cart:

  • Description
  • Info & Guide
  • Specs
  • Reviews
Guaranteed Quality Pelton Crane OCM Autoclave Repair Parts

Part #PCS036-049
OEM Part #004018

  • 6 per package
Fits: Air Valve Housing
Model This Part Fits: Pelton Crane OCM Autoclaves

Location: The Air Valve is connected to the Top Rear of the Water Reservoir. It is the Housing that the Bellows Screws Into

Is Your Air Release Valve Seat Defective?

Inspect the Air Valve Release Set, by removing the bellows assembly and, using a flashlight, look inside the Air Valve Housing. If it is dirty, take a damp cotton swab and clean the seat


Then, inspect the air release valve seat for wear & tear. If it is cracked, torn or chipped, it will need to be replaced

Service Tip: When referring to air valve housings, a round reservoir uses a pipe tap and a square reservoir uses a straight tap.

Warning: This can be a very difficult procedure. The Air Release Valve Seat can be difficult to install if you have the factory original Air Valve housing. When Pelton Crane made these housings, they included a little lip inside the housing to hold the air valve release seat in place.

And that lip is the problem. It gets in the way of installing the new seat. It will take some patience to complete this repair.

The lips have been removed on the replacement air valve housings. So if you are short on patience and/or time......just replace the entire housing with the right one for your unit as shown below

For Air Housings:
  • Click Here If Your OCM Serial Number is Serial # 34350 & Above (Part #PCV057-067 & OEM Part #004318)
  • Click Here If Your OCM Serial Number is Serial # 1001 To 16525 (Part #PCV058-068 & OEM Part #002279
  • Click Here If Your OCM Serial Number is Serial # 16526 To 34349 (Part #PCV059-069 & OEM Part #011155)
"Pelton Crane OCM Autoclave Repair Made Simple™"

There are currently no any reviews about this product.

Customer Reviews
Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
Mon thru Fri 8:00am To 4:30 pm Central Time


Don't Take Our Word For It.....

Customer Reviews

AllClaveParts.com - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.
Clearview Medical.com

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI

Dr Whitehouse Loves AllClaveParts.com
"It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile

Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to allclaveparts.com.

Steve Douglas, DDS
Indianapolis, IN

Parse Time: 0.309 - Number of Queries: 263 - Query Time: 0.150178741577

Check Out Our Specials

A Best Seller
Click Here To Check Out Everything On Sale