OCR PRESSURE RELIEF VALVE


$83.97

Add to Cart:


  • Description
  • Info & Guide
  • Specs
Guaranteed Quality Pelton Crane OCM Autoclave Repair Parts

Part #PCV052-144
Pelton Crane Part #004146 / 002-0359-00

PRESSURE RELIEF VALVE
  • 1/2 MPT x 1/2 FPT
  • Cracking Pressure: 35 PSI
Fits: Chamber
Model This Part Fits: Pelton Crane OCR Autoclave

If you see evidence the Pelton Crane OCR Autoclave Pressure Relief Valve is Leaking, Replace it right away.

Even a small drip will act like a leak and keep the autoclave from reaching the proper temperature and pressures needed for sterilization. If this happens, your instruments Are Not Being Sterilized. So replace it immediately

Tech Tip: To remove the Pressure Relieve Valve from the chamber of the Pelton Crane OCR Autoclave, simply turn it in a counter-clockwise. We use a pipe wrench to remove them. It makes the job a whole lot easier!

HOW TO REPLACE THE PELTON CRANE OCR AUTOCLAVE SAFETY VALVE


The Pressure Relief Valve on The Pelt0n Crane OCM & OCR Autoclaves is located towards the rear and top of the chamber
  1. Unplug Autoclave And Ensure No Pressure Is In The Chamber
  2. Remove The Outer Casing
  3. Locate The Valve at Upper Left Rear Of Camber
  4. Remove The Valve as outlined in the Tech Tip Above
  5. Install the New Valve (Using Plumber's Putty on Threads If Needed To Assure A Tight Seal
  6. Re-use the Directional Pipe Attached To The Old Valve
  7. Manually Activate Valve By Pulling Up On The Ring Periodically to Check Proper Function & Seating
  8. Re-Install Outer Casing


"Pelton Crane OCR Autoclave Repair Made Simple™"



Customer Reviews
Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
636-390-2792
Mon thru Fri 8:00am To 4:30 pm Central Time

Testimonials

Don't Take Our Word For It.....


Customer Reviews


AllClaveParts.com - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.
Clearview Medical.com

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI


Dr Whitehouse Loves AllClaveParts.com
"It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile


Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to allclaveparts.com.

Steve Douglas, DDS
Indianapolis, IN
stevedouglasddspc.com


Parse Time: 0.500 - Number of Queries: 282 - Query Time: 0.230360818939
Content

Check Out Our Specials


A Best Seller
Click Here To Check Out Everything On Sale