DELTA 10" (AF) STERILIZER PM KIT


$82.97

Add to Cart:


  • Description
  • Info & Guide
  • Specs
Guaranteed Quality Pelton Crane Autoclave Repair Parts

Part #PCK223-170
Pelton Crane Part #1539407 (Gasket only)

STERILIZER PM KIT

  • Includes: See Notes
  • All parts are also sold separately
  • For annual PM of sterilizer or as needed

Notes: Includes:

Model This Part Fits: Pelton Crane Delta 10 Autoclave


Preventative Maintenance Checklist
& Installation Instructions
AllClaveParts.com
Sterilizer PM Kit (Part #PCK223-170)
Delta 10" (AF) Sterilizer Preventative Maintenance Kit
Part Number Description Sterilizer Preventative Maintenance Tip
PART # PCG066-1265 Door Gasket Remove the old door gasket. Clean the gasket groove and chamber face ring surface.

For easy install of the new gasket, use the "star" or "North-South-East-West" method (ie. begin installing the gasket at the top of the door, then the bottom, then the left side, then the right side, and then eveything in between making sure that the gasket fits flush without bumps or gaps).
PART # PCS067-262 Spacer (Door) Take CAUTION when removing or installing the door spacer: the doors tabs can be sharp.

To install door spacer, place the spacer on and over the door tabs. The spacer MUST lie flat against the door.
PART # PCF009-251 Filter Fill Line (Chamber) Remove all trays from the chamber. Remove the chamber filter. Clean chamber.

Install new filter making sure that the it is placed at the bottom and center of the chamber.
PART # PCK167-254 Reservoir Filter Kit Remove the sterilizer cover, drain and clean the reservoir if necessary when removing the old reservoir filter.

Be sure to install the new o-ring when installing the new filter. Refill with distilled water only.

Delta AF Sterilizer After replacing the PM parts:
  1. Conduct a temperature check using a Max Register Thermometer (Part #RPT113)

  2. Conduct a pressure check to identify any leaks that may need to be addressed.




Customer Reviews
Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
636-390-2792
Mon thru Fri 8:00am To 4:30 pm Central Time

Testimonials

Don't Take Our Word For It.....


Customer Reviews


AllClaveParts.com - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.
Clearview Medical.com

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI


Dr Whitehouse Loves AllClaveParts.com
"It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile


Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to allclaveparts.com.

Steve Douglas, DDS
Indianapolis, IN
stevedouglasddspc.com


Parse Time: 0.293 - Number of Queries: 221 - Query Time: 0.117447488083
Content

Check Out Our Specials


A Best Seller
Click Here To Check Out Everything On Sale