Statim Part #01-110445s (Ulka Pump -Statim 2000)
WATER PUMP KIT
- 120Volts, 60Hz.
- This Ulka brand pump will accommodate StatIM 2000 Sterilizers with PCB Software Rev. 7 and above only
- See Notes below
Model This Part Fits: Statim 2000 Autoclaves
Make Sure You Order The Right Water Pump for Your Statim Autoclave
Even though the software version usually indicates which water pump is installed in the Statim Autoclaves, we have run into many instances where it is not accurate.
Be sure to look at the top of the water pump currently installed in your autoclave, and compare it with the pictures below.
If you unit does not have the Overheat Thermostat, then this Newer Version is the pump you need
But, If you have the older version with the Over Heat Thermostat as shown in the picture above, then click on the link below for your model for the Water Pump You Need:
Click Here For Easy To Follow Instructions On Locating Your Software Revision Number