(image for) Statim 5000 CASSETTE MICRO-SWITCH COMPLETE KIT

Statim 5000 CASSETTE MICRO-SWITCH COMPLETE KIT

Model: SCK007K-8841

$69.97

Description

Guaranteed Quality Statim Autoclave Repair Parts

Part #SCK007K-8841
Statim Part #01-100571S

CASSETTE MICRO SWITCH COMPLETE KIT

 

 

When your Statim 5000 Tells you to Insert The Cassette, but the Cassette Is Already In Place, Then this is the Kit You Need To Fix It!

 

 

 

Here is what is happening: When the Cassette is fully inserted into the Cassette Bay, the cassette pushes in the arm on the micro-switch, which in turn pushes the button underneath the arm in

 

When the button is depressed, it sends a signal to the Control Board that the cassette is in place and the autoclave can now advance on to the cycle

So, When you are getting the "Insert Cassette" message on your display, even after the cassette is fully inserted into the bay, it is a safe bet that the Cassette Micro-switch is defective and needs to be replaced

This AllClaveParts Exclusive Kit Contains Everything You Need To Make a Professional Repair, Including:

  • Micro-switch Kit Part #SCK007-6197 Including:
    • Micro-Switch with 26" wire
    • (2) Split Lock Washer (Part #RPH253)
    • (2) Socket Head Cap Screw (Part #ADS120)
    • (6) Cable Tie (Part #RPT083)
  • Hex Ball Driver Part #RPT297-508 To Make This Installation & the Next Repair Easier
  • Statim 5000 ADHESIVE (RTV108) Part Number RPA874-8142 Needed To Seal Off The Micro-switch Against Exposure To Steam

Fits: Probe Bracket

Model(s) This Part Fits: Statim 5000 Autoclaves

TIP The Original Statim Micro-switch is held in place with two small Pan Head screws which are difficult to remove.

In addition, the compressor must be removed in order to access these screws.

However, the AllClaveParts Micro-switch comes with two Socket Head Cap screws which are easy to install or remove when using the Hex Balldriver included with this kit

The Hex Balldriver is designed to reach way back into the machine to easily remove the screws, even at an angle, and without having to remove the compressor (see drawing below)

Caution: Disconnect the power to the autoclave (unplug from the wall outlet) before servicing

Easy Way To Install The Micro-Switch
Fast Delivery

We usually ship the same day! All packages are shipped w/Delivery Confirmation.

100% Secure Payment

Your transaction is secure thanks to the PayPal payment system: SSL (Secure Socket Layer).

Shopper Award
(image for) AllClaveParts Payment Methods
allclaveparts.com widget logo