Setting the Date & Time on Statim Autoclaves

How To Set the Time and Date on Statim Autoclaves with Printer


The time and date feature is available with the optional printer only. To set the time and date follow these steps while watching the blinking cursor on the LCD.

  1. Turn the main power switch off
  2. Press and hold the UNWRAPPED button on the front of the Statim. At the same time, turn on the main power switch at the back of the Statim. The display should appear similar to the following example
  3. 18:30 01/01/2015
    hh:mm dd/mm/yy

    NOTE: The date reads day, month and year.

    Date & Time on the Statim 5000 Autoclave

  4. There are five fields on the display showing the hours (24 hour clock), minutes, day, month and year. The cycle buttons of the keypad are used to select a field for setting and changing that field’s value. The blinking cursor highlights the field currently selected
  5. To increase the value of the selected field, press the UNWRAPPED cycle button. Hold the button down to continuously increase the value
  6. To decrease the value of the selected field, press the WRAPPED cycle button. Hold the button down to continuously decrease the value
  7. To select the next field for setting, press the RUBBER AND PLASTICS cycle button. Press the button repeatedly to select subsequent fields
  8. To save changes and return to regular operating mode, press the STOP button

allclaveparts.com widget logo