2340EKA HEPA FILTER

Part #RPF644-1711
Tuttnauer Part #03140036

HEPA FILTER

• ~2.5" long
• Accommodates tubing with ID of 1/4"-3/8"
• For use with air or gasses only
• Includes (1 piece) Cable Tie (12" Black) Part #RPT375

Fits: Filter Cover (The Air Filter is located behind the gray cover on the right hand side of the 2340EK Autoclave)

Model This Part Fits: Tuttnauer 2340EKA Autoclaves

It is recommended the HEPA Filter be changed annually when the normal Preventative Maintenance is being performed or as needed

This Part is included in the Tuttnauer 2340EKA Preventative Maintenance Kit TUK127-5838

The indication that the Air Filter is ready to be changed is that the Dry Cycle is taking longer and longer to completely dry the packs

The HEPA Filter is very important!

During the Drying Stage, the Air Pump draws air through the HEPA Filter and pushes the filtered air into the heated chamber to facilitate drying.

During this process, the Sterilization Cycle has been completed, and there is no longer any pressure remaining in the chamber (and the heat drops considerably). So, if the air is not filtered through the HEPA Filter, the sterility of the instruments you just sterilized is compromised.