Eagle 10 & 10 Plus HEATER ASSEMBLY

Eagle 10 & 10 Plus HEATER ASSEMBLY

Model: AMH162-1414

$236.95

Description

Guaranteed High Quality AMSCO Eagle 10 Autoclave Replacement Parts

Part #AMH162-1414
AMSCO Part #P136807855

HEATER ASSEMBLY

  • 120 VAC, 1500W, (9ohm)
  • Includes mounting hardware (Part #AMH164-1415)
  • Mounts to bottom of chamber

Model(s) This Part Fits: Eagle 10 & 10 Plus

Tech Tip: Be sure your Eagle 10 Heating Element is defective before replacing it, by performing the following test

How To Test The Eagle 10 & Eagle 10 Plus Heating Element


This test consists of measuring the amount of resistance in the heating element. To do this, first, turn the autoclave off and unplug it from the wall

WARNING: CURRENT MUST NOT BE PRESENT WHEN MEASURING RESISTANCE.


Set your volt/ohm meter on 200 ohms (200 NOT 200k). The ohms range is located within the Omega (Ω)(look for this symbol) section of your meter. It is also the area with "k" ranges (ie: 2000k,. 200k, 20K and then 2000, 200).

Place a probe from the volt/ohm meter on each wire where it connects to the heater (it really doesn't matter which color probe goes where).

 

For the heating element to be good, it must fall within the resistance range in this table (between 8.1 and 9.9 ohms) If your reading is outside of this range, then it is defective and needs to be replaced.
Model Volts Watts Amps Resistance Resistance Range
Eagle 10 & Eagle 10 Plus 120 V 1500 W 12.5 Amps ~9 Ohms 8.1 9.9 ohms

 

 

 

Fast Delivery

We usually ship the same day! All packages are shipped w/Delivery Confirmation.

100% Secure Payment

Your transaction is secure thanks to the PayPal payment system: SSL (Secure Socket Layer).

Shopper Award
AllClaveParts Payment Methods