Another AllClaveParts Exclusive: The Most Comprehensive Tuttnauer Autoclave Troubleshooting & Maintenance Guides To Be Found Anywhere - At Any Price - Can Only Be Found Here....... And They Are Absolutely Free!
To access some of the parts for troubleshooting and repairing your Midmark Autoclave, you will need to remove the Back Panel. This handy guide will walk you through the process of both removing & reinstalling the Back Panel
Warning: Ensure that wires are completely disconnected before attempting to remove back panel. Failure to do so could result in damage to sterilizer
NOTE: Units prior to serial number CZ1110/OM1000 have a fuse holder attached to the back panel. On these sterilizers, tag and disconnect the two wires from the receptacle and one wire from the fuse holder instead of performing step 6
NOTE: Units prior to serial number CZ1110/OM1000 have a fuse holder attached to the back panel. On these sterilizers, remove tags and connect two wires to the receptacle and one wire to the fuse holder instead of performing step 1