How To Open The Magnaclave Door When the Power Goes Out

Free Autoclave Troubleshooting Guides



CAUTION: Unplug the Machine From the Wall Socket Before Attempting To Open The Door Manually

CAUTION: Make Sure The Machine Cools Down So You Can Touch The Inernal Components Without Getting Burned

CAUTION: Actuate The Safety Release Valve and Make Sure All Pressure Is Released Before Attmepting The Following Steps

  1. Remove the Right Side Casing (Viewed From the Front)From the Machine
  2. Raise The Door Handle Lever Until It Stops and Hold It In This Position. This Is the First Stop
  3. With The Handle Raised, Reach In The Machine And Pull The Solenoid Plunger In
  4. With The Plunger Pulled In, Raise The Door Handle Until It Stops Again, And Continue Holding It In This Position. This Is the Second Stop
  5. Release The Solenoid Plunger
  6. Press The Black Door Release Button on the Front Of The Machine And Raise The Door Handle For The Third Time Until It Stops
  7. The Door Is Ready To Be Opened
  8. Replace The Right Side Casing
  9. Plug the machine Back Into The Wall Socket

allclaveparts.com widget logo