Description
Part #TUG003-1055
OEM Part #02610023
DOOR GASKET
- 10.590" OD
- Green silicone
Fits: Door
Model This Part Fits: EZ10
Important: Because of Frequent Use, Door Gaskets take the brunt of the wear and tear and tend to wear faster and leak than other components. Water leakage and continual cycle failures will continue until the Door Gasket is replaced. Defective gaskets also will leave small particles on the door. So be sure to clean the Door Gasket Groove on the door and the mating surface on the cabinet before installing the new gasket
To prevent overheating problems and early wear and tear on the machines themselves, it is suggested to replace on a regular basis.
Tuttnauer EZ10 Door Gasket Installation Procedure
Remove the old door gasket. Clean the gasket groove and chamber face ring surface.
For easy install of the new gasket, use the “compass” (“North-South-East-West”) method (ie. begin installing the gasket at the top of the door, then the bottom, then the left side, then the right side, and then eveything in between making sure that the gasket fits flush without bumps or gaps) as shown in the picture below
