Shopper Award
AllClaveParts
Midmark M11 DOOR & DAM GASKET KIT

Midmark M11 DOOR & DAM GASKET KIT

(13) 4.92 out of 5 stars
Model: ACPMM11-3381

$104.97

Midmark M11 Autoclave Parts -  Guaranteed High Quality

Part #ACPMM11-3381
Midmark Part #002-0508-00

Midmark M11 Door & Dam Gasket Kit

Includes:

Fits: Door

Model This Part Fits: Midmark M11 Autoclaves

Midmark recommends that the Door & Dam Gasket on the M11, should be changed every 12 months (every 6 months for busy practices).

Do not let the appearance of the gaskets fool you. If you are following the maintenance instructions and cleaning the door gaskets weekly, then they can look like new.... with no signs of wear and tear. But that does mean they are good. Over time, the gaskets will shrink. Not enough that you will notice it, but enough to let the steam escape

A steam leak from a faulty or worn door/dam gasket can result in a variety of error codes. If you want to confirm that the gaskets are causing steam leaks around the door, you can rotate the door gasket approximately 45° and start another cycle. If the leak follows it, then the door gasket is faulty and needs to be replaced

Warning: Do Not operate the sterilizer with a steam leak. Running the unit with a leak can cause damage to other components

Note: Both Gaskets have recently been upgraded in both fit & materials, including High Quality Red Silicone Rubber construction. (When installing, be sure to remove the metal ring from the old Door Gasket...you do not need it with ours!)

How to Replace the Door & Dam Gaskets


Removal
  1. Open sterilizer door to gain access to the gaskets
  2. Remove the dam and door gaskets by pulling them out of the grooves
  3. Clean the groove and faceplates and make sure to remove all debris
Installation
  1. Install the new door gasket by inserting it into the groove in door at 4 points. Best practice is to start by pushing it into the grooves in like you are making a plus sign. Push it in at the top (North) then the bottom (South) then the right side (East) and then to the left (West) & then work out the excess in between each point)
  2. Secure dam gasket by pressing onto mounting pins
  3. Install dam gasket (1) by inserting bottom edge of the dam gasket into the slot at the bottom of the door gasket. Best practice is to make sure the dam gasket is fully seated on the pins by using a nut driver (or socket) to push it all of the way on
  4. Close the sterilizer door
(13) 4.92 out of 5 stars
See all 13 reviews Write Review
92.31%

Lloyd Verified Buyer October 25, 2018 South Carolina, United States
Quick response, great quality product, and excellent customer service!!. Will definetly recommend to anyone looking for the autoclave. I will go back to buy again. Thank you!!
Was this review helpful to you?YesNo
Share This Review

Dietmar Verified Buyer October 05, 2018 Texas, United States
They went above and beyond to help us!. Will definetly recommend to anyone looking for the autoclave. I will go back to buy again. Thank you!!
Was this review helpful to you?YesNo
Share This Review

Lisa Verified Buyer April 02, 2018 Florida, United States
Easy, user friendly website. Will definetly recommend to anyone looking for the autoclave. I will go back to buy again. Thank you!!
Was this review helpful to you?YesNo
Share This Review

There is no any question about this product.

Qty

Fast Delivery
We usually ship the same day! All packages are shipped w/ Delivery Confirmation

100% Secure Payment
Your transaction is secure thanks to the paypal payment system: SSL (Secure Socket Layer)

Shopper Award

AllClaveParts Payment Methods