Description
Compare at $170.00
Part #MIV118-7474
Midmark Part #014-0419-00
AIR VALVE SOLENOID VALVE (COMPLETE VALVE ASSEMBLY)
- 120VAC / 60 Hz. FWR
- 1/8 FPT; Piston style valve
- Brass body; Viton seats
- 2 way; N.C.; High Temperature coil: 180°C (350°F)
- Also available: The Air Valve Repair Kit Part #MIK119-7459 and the Air Valve Solenoid Coil Part #MIC120-5883
- See Notes below for Serial Numbers this part fits
Fits: Air Valve
Model This Part Fits: Midmark M11D Autoclaves
Here is where The Midmark M11 Air Valve is located
Notes: This Solenoid Fits Midmark M11D Autoclaves With The Following Serial Numbers:
- Fits M11D-020 thru -022 with Serial # prefixes RY, RZ & V
Midmark AIR VALVE OPERATION
(HOW IT WORKS)
During The Fill Mode
Line voltage is supplied to the air valve. This causes the valve to open so that water can flow into the chamber.
During The Heat-Up Mode
When the Heat-Up Mode begins, the PC board stops the current flow to the air valve. This allows the valve to close. The PC board opens the air valve three times during the Heat-Up Mode to release air from the chamber (this prevents vacuum-effect). The temperature & pressure will drop slightly each time the valve opens & purges the air from inside the chamber
During The Sterilization / Vent / Dry Modes
There is no current flow to the air valve. The valve is closed.
Troubleshooting The Midmark Air Valve
If Steam is Escaping Thru the End Of The Condensation Coil Located Inside The Water Reservoir beyond the purge cycle, then The Air Valve is defective and Needs To Be Replaced
