Add to Cart:

  • Description
  • Info & Guide
  • Specs
  • Reviews
Guaranteed Quality Statim Autoclave Repair Parts

Part #SCK007-380
Statim Part #01-100571S


When your Statim 2000 Tells you to Insert The Cassette, and the Cassette Is Already In Place, Then this is the Part You Need To Fix It!

When the Cassette is fully inserted into the Cassette Bay, the cassette pushes in the arm on the switch, depressing the button underneath the arm and sends a signal back to the Control Board that the cassette is in place and the board can now advance on to the cycle

When you have the cassette in place and the Statim 2000 still tells you to insert the cassette, it is a safe bet that the Cassette Microswitch is defective and needs to be replaced

  • Micro Switch with 26" wire
  • 12" clear PVC tubing
  • (2) Split Lock Washer (Part #RPH253)
  • (2) Socket Head Cap Screw (Part #ADS120)
  • (6) Cable Tie (Part #RPT083)
Tech Tip: It Is Highly Recommended The Statim 2000 SILICONE GASKET MAKER 598 Part Number RPS369-6304 Be Used When Installing The New Microswitch

Recommended Tool: The Hex Balldriver

Fits: Probe Bracket
Model This Part Fits: 2000 Autoclaves


The Statim Microswitch is held in place with two small Pan Head screws which are difficult to remove.

In addition, the compressor must be removed in order to access these screws.

However, the AllClaveParts Microswitch comes with two Socket Head Cap screws which are easy to install or remove when using the Hex Balldriver.

The Hex Balldriver is designed to reach way back into the machine to easily remove the screws, even at an angle, and without having to remove the compressor (see drawing below). (Caution: Disconnect the power to the machine before servicing it.)

Easy Way To Install The Micro Switch

There are currently no any reviews about this product.

Customers who bought this product also purchased...

Customer Reviews
Solution Graphics
Pay By Credit Or Debt Card
-Pay By Credit Card-
Proceed To Checkout And Enter Your Credit Card Information In Step 2

Pay By Credit Or Debit Card
To Order By Phone Call
Mon thru Fri 8:00am To 4:30 pm Central Time


Don't Take Our Word For It.....

Customer Reviews - Real Help With Your Autoclave Repair When You Need It

"My Statim 2000 stopped working.

Benco dental came down and said the thermal fuse and computer board was bad

Real Problems Solved By Dr Gorenburg With AllClaveParts help

Wally, thank you and your company for providing great customer service and all the help I needed to fix my autoclave.

Dr Haruki & Son

My tech told me my STATIM 2000 repair could either be about $350 (if it was only the thermal fuse) or up to $1500 if it was another problem.

Craig Haruki DDS
Lihue, HI

Dr Whitehouse Loves
"It was a pleasure working with Wally who saved me thousands over what I would have had to pay when the Patterson tech......"

Dr Joseph Whitehouse
Castro Valley, CA
Create A Smile

Dr Steve Says Midmark Told Him To Throw It Away, But AllClaveParts Showed Him How To Fix It Well, that same autoclave is once again working like a champ thanks to

Steve Douglas, DDS
Indianapolis, IN

Parse Time: 0.423 - Number of Queries: 359 - Query Time: 0.178591768509

Check Out Our Specials

A Best Seller
Click Here To Check Out Everything On Sale