Midmark M9 PRINTER CARTRIDGE

Description

Part #MIC226-8810
Midmark Part #053-0505-00

Midmark PRINTER CARTRIDGE

• Epson brand ribbon cartridge
• Color: Black

Fits: Printers (Old Style and New Style)

We Now Have Printer Paper Available for Your Midmark M9 Autoclave:  (Part # RXP088-9421)

Model This Part Fits: All Midmark M9 Autoclaves

Note: If the printed material is difficult to read and you suspect a dried out ribbon is the cause of the problem, advance to a properly inked portion of the ribbon by pressing the "PAPER FEED" button for three seconds. If this procedure does not correct the problem, replace the cartridge ribbon.

1. Remove printer assembly from top cover
2. Remove the printer cover. (Bend the housing out slightly to release tabs)
3. Push down on the side of the cartridge marked "Eject" and then remove cartridge
4. Install the new cartridge. Be sure the ribbon is inserted in front of the paper, and flat against the paper
5. Press cartridge down until it snaps into place
6. Turn the cartridge knob clockwise until ribbon is tight
7. Install printer cover / position printer on autoclave