(image for) Barnstead 2251 DUAL HEATING ELEMENT

Barnstead 2251 DUAL HEATING ELEMENT

Model: RCH027-904

$202.97

Description

 

Part #RCH027-904
OEM Part #260332
Old OEM Part #63824

DUAL HEATING ELEMENT

 

  • 120VAC, 1350W (~10ohm); 100W (~144ohm)
  • Sheathing: Electrogalvanized Sheet Stell
  • Mounts on outside of chamber

Model(s) This Part Fits: 2250 & 2251, 2260, 800, GLS10, 800V, 1000, 1000R, GLS8

RCH027
HEATING ELEMENT
INSTALLATION INSTRUCTIONS
1. Remove old heater in normal fashion.
2. Inspect and clean outside of chamber.
3. Install new heaters, making sure that contact between heater and
chamber is evenly distributed.
CAUTION
To assure no burnout due to hot spots, be certain that: a)
chamber surface is dry and smooth; and, b) contact of
heater to chamber is completely even and uniform.
4. Replace back up plate.
5. Sequentially tighten tie down bands. The same amount of
torque should be applied to all three bands (40 in. lbs.).
6. Perform final inspection. Verify that the curvature of the heaters
matches the chamber and that no gaps exist.
NOTE
Heater may show discoloration due to post production
burn in and may smoke slightly for up to two minutes
when first installed.
7. After testing the unit, retighten the tie down bands.
(Note: Excessive tightening of nuts may cause heater to fail.)

Fast Delivery

We usually ship the same day! All packages are shipped w/Delivery Confirmation.

100% Secure Payment

Your transaction is secure thanks to the PayPal payment system: SSL (Secure Socket Layer).

Shopper Award
(image for) AllClaveParts Payment Methods
allclaveparts.com widget logo